- Home
- Service areas
- Patio Enclosures Brisbane
Patio Enclosures Brisbane
Patio enclosures in Brisbane: screens, walls and windows that turn a patio into a room.
Your patio in Enclosures Brisbane, start to finish
An enclosure turns an open patio into usable space in any weather: privacy screens, aluminium louvres, fixed walls, or full glass and doors. It is also where most people get caught by council, because a fully enclosed patio can count as a habitable room.
We design enclosures so they stay on the right side of the rules, or we get the approval if you want a full room. New patios can be built ready for screens later.
- One team from quote to handover, no salespeople
- Genuine Colorbond and BlueScope steel, all engineered
- Plans, engineering and approval handled
What's different about building in Enclosures Brisbane
Partly enclosed is simpler
Screens on one or two sides usually stay within patio rules. Fully enclosed changes the approval.
Privacy on tight lots
On close Brisbane lots a privacy screen on one side often does more than any roof.
Built for the weather
Screens and walls change the wind load on the roof. We engineer for it.
Which patio suits your home?
Attached
Fixed to the fascia or a wall of your home. The most common and the best value.
See attached patios →
Flyover
Raised above your gutter for extra height, air flow and a modern look.
See flyover patios →
Freestanding
Stands on its own posts, anywhere on your block.
See freestanding patios →
Gable & hip
A pitched roof that matches your house. Attached, flyover or freestanding.
See gable & hip patios →
Louvred
Opening blades: sun when you want it, shelter when you need it.
See louvred patios →Single skin or insulated?
Tap one to see what you get.
Single skin
- The lowest-cost option
- Spans up to about 5 m between beams
- Can be built as close as 450 mm to a boundary (with approval)
- Hotter and louder in rain than insulated
- No downlights or fans in the roof
Best for: Carports, flyovers with good air flow, and budget builds.
From underneath you see the ribbed roof sheets and the steel purlins that hold them. Lights and fans fix to the beams.
Quote a single skin roof
Insulated panel
- Keeps the heat out — noticeably cooler underneath
- Quiet in rain
- Finished white (or coloured) ceiling, no visible purlins
- Downlights and ceiling fans built in
- Longer spans, fewer beams
Best for: Patios and outdoor rooms you will sit under and use all year.
From underneath you see a flat, finished ceiling, usually Surfmist, with downlights and a fan set straight into it. Thicker panels span further and insulate better.
Quote a insulated panel roof
Recent patios
From quote to handover
On-site quote & design
We come out, measure up and design it with you — colours, post and beam spacing, all within the engineering.
Plans & council approval
We draw, engineer and lodge everything: site plan, engineering, Form 15 and the building approval.
Materials ordered
Once approved, the materials are ordered from Australian suppliers. This takes about 2–4 weeks.
The build
Materials never sit at your place longer than 14 working days. Weather can delay us; we keep you posted.
Patio Enclosures Brisbane: common questions
Do I need approval to enclose my patio in Brisbane?
Usually, yes, especially if it becomes a fully enclosed room. Partial screens are simpler. We check and handle it.
Can you enclose an existing patio?
Often, yes, if the existing structure can take the extra wind load. We inspect first.
What can I use to enclose a patio?
Privacy screens, aluminium louvres, Colorbond walls, glass and sliding doors, or a mix.
Planning a patio in Enclosures Brisbane?
Send us the size and the address, then we come out, measure up and check the council rules for your lot.