- Home
- Patios
Patios for South East Queensland homes
An outdoor room you will actually use — shaded, cool and dry. Built from Australian-made Colorbond and BlueScope steel, approved and built by our own team.
Five ways to build a patio
Attached patios are fixed to your fascia or wall; flyovers sit above your gutter for height and air flow; freestanding patios go anywhere on the block.
Attached
Fixed to the fascia or a wall of your home. The most common and the best value.
See attached patios →
Flyover
Raised above your gutter for extra height, air flow and a modern look.
See flyover patios →
Freestanding
Stands on its own posts, anywhere on your block.
See freestanding patios →
Gable & hip
A pitched roof that matches your house. Attached, flyover or freestanding.
See gable & hip patios →
Louvred
Opening blades: sun when you want it, shelter when you need it.
See louvred patios →Single skin or insulated?
For a patio you sit under, most people choose insulated — it is cooler, quieter and lets you add downlights and a fan.
Single skin
- The lowest-cost option
- Spans up to about 5 m between beams
- Can be built as close as 450 mm to a boundary (with approval)
- Hotter and louder in rain than insulated
- No downlights or fans in the roof
Best for: Carports, flyovers with good air flow, and budget builds.
From underneath you see the ribbed roof sheets and the steel purlins that hold them. Lights and fans fix to the beams.
Quote a single skin roof
Insulated panel
- Keeps the heat out — noticeably cooler underneath
- Quiet in rain
- Finished white (or coloured) ceiling, no visible purlins
- Downlights and ceiling fans built in
- Longer spans, fewer beams
Best for: Patios and outdoor rooms you will sit under and use all year.
From underneath you see a flat, finished ceiling, usually Surfmist, with downlights and a fan set straight into it. Thicker panels span further and insulate better.
Quote a insulated panel roof
Popular patio sizes
Measure the area you want covered, then add room to walk around the table. Width runs along the house; projection is how far it comes out.
Small patio
A table for four outside the back door.
Standard patio
Outdoor dining and a barbecue — our most common patio.
Entertaining patio
Dining plus a lounge area.
Large outdoor room
A full outdoor living space, often insulated with lights and fans.
Every build is made to measure — these are just starting points. Send us your size for a quote.
What you get with every patio
One team from the first measure to the last screw — no subcontracted salespeople, no surprises.
- An on-site measure and design with a builder
- Site plan, engineering and Form 15
- Council or private certifier approval lodged for you
- Australian-made Colorbond and BlueScope steel
- Delivery and the build by our own team
- QBCC-licensed work, with the QBCC home warranty
From quote to handover
On-site quote & design
We come out, measure up and design it with you — colours, post and beam spacing, all within the engineering.
Plans & council approval
We draw, engineer and lodge everything: site plan, engineering, Form 15 and the building approval.
Materials ordered
Once approved, the materials are ordered from Australian suppliers. This takes about 2–4 weeks.
The build
Materials never sit at your place longer than 14 working days. Weather can delay us; we keep you posted.
Proud to build only with genuine COLORBOND® and BlueScope steel
No imitation steel, ever. Every patio, carport and deck frame we build is genuine COLORBOND® and BlueScope steel, made in Australia and backed by the manufacturers' warranties. Insulated roofs are Superior Panel, frames and sheeting LYSAGHT®, and every build is engineered and certified for your site's wind rating.
Any Colorbond colour
Roof, beams, posts and gutters in the colours that suit your home. See the colours
- SurfmistThe most popular ceiling colour — bright and clean under insulated panels.
- PaperbarkA warm sandy neutral that blends with most houses.
- Shale GreyA light grey that keeps a roof cooler than the darker shades.
- Woodland GreyA deep green-grey — one of the most chosen roof colours.
- BasaltA mid grey that goes with almost any brick or render.
- MonumentA charcoal for a sharp, modern look.
Patio builders in your area
- Patios Beenleigh
- Patio Belmont
- Patios Birkdale
- Patios Brisbane
- Patios Capalaba
- Pergolas Capalaba
- Patios Carindale
- Patios Chambers Flat
- Pergolas Cleveland
- Patios Coomera
- Patio Enclosures Brisbane
- Patios Flagstone
- Patios Greenbank
- Patios Helensvale
- Patios Holmview
- Patios Ipswich
- Patios Jimboomba
- Patios Logan
- Pergolas Logan
- Patios Logan Reserve
- Pergolas Macgregor
- Patios Mount Cotton
- Patios New Beith
- Patios Ormeau
- Patios Park Ridge
- Patios Pimpama
- Patios Redbank Plains
- Patios Ripley
- Patios Shailer Park
- Patios Springfield
- Patios Springfield Lakes
- Patios Springwood
- Patios Sunnybank
- Patios Upper Coomera
- Patios Yarrabilba
Patio questions
Do I need council approval for a patio or carport?
Usually, yes. In Queensland a structure needs a building approval if it is over 10 m², taller than 2.4 m at the peak (2.1 m for a patio), within 6 m of the front boundary, or longer than 5 m along a boundary. We prepare and lodge the approval for you as part of the job.
What is the difference between single skin and insulated?
Single skin is one sheet of Colorbond steel — strong and the cheapest option, but hotter and louder in rain. Insulated panels have two steel skins with insulation between, so they are much cooler and quieter and give you a finished ceiling for downlights and fans.
Can I add downlights or a ceiling fan?
With insulated panels, yes — downlights and fans are fitted straight into the ceiling. On a single skin roof, lights can be fixed to the beams instead.
Can you build next to the boundary?
Sometimes. Single skin roofs can go as close as 450 mm and insulated roofs 900 mm from a side boundary, with the right approval. Check our council approvals page for the rules, or ask us about your block.
How long does it take?
After approval, materials take about 2–4 weeks to arrive. Most builds are finished within a few days of starting, and materials are never left at your home longer than 14 working days.
What happens at the on-site quote?
We measure up, look at access, the slab or ground and where the roof fixes to the house, and go through styles and colours with you. You get a fixed price for your design afterwards.
Guides
- How much does a patio cost in Brisbane? What really changes the price
- Insulated patio roof panels: a complete guide for Queensland homes
- Patios and shade by the pool: what works in Queensland
- Patio lighting and ceiling fans: planning downlights, fans and power
- Gable patio ideas for Queensland homes
- Council approval for a patio or carport in Logan, Brisbane and Ipswich: step by step
- Patio enclosures and privacy screens: turning a patio into an outdoor room
- Flood, bushfire (BAL) and landslide overlays: what they mean for your patio or carport
- Shade sail or patio roof? Approvals, wind, hail and the real cost in Queensland
- Building a patio or carport over or near a sewer in South East Queensland
- How big can my patio be? Site cover rules in Logan, Ipswich, Brisbane and the Redlands
- Patios and carports on a Brisbane character house
- Gold Coast carport and shed rules: front setbacks, the 36 m² trigger and canal lots
- Council planning changes in South East Queensland, late 2026: what affects patios and carports
- Patio and carport approval in Yarrabilba: estate rules, plans of development and Logan council
- Building a patio or carport in Flagstone: estate lots and acreage compared
- Patio approval in Ripley: estate rules, Ipswich council and Urban Utilities
- Patio approval on small lots in Pimpama, Coomera and Ormeau
- Do I need council approval for a patio in Ipswich?
- Redland City Council patio and carport rules: canals, corners, the 9 m boundary and sewers
- Selling a house with an unapproved patio or carport in Queensland
- Rain noise and condensation under a patio roof: single skin vs insulated
- Colorbond Ultra and coastal patios: building near salt water in SEQ
- Louvred roof or insulated patio: which suits a South East Queensland home?
- Storm season checklist for patios and carports (October to March)
- Patio posts near a pool fence: the climbable zone rules in Queensland
- Pool cabana and pavilion ideas for Queensland backyards
- Gutters and downpipes on a patio or carport: where the water goes
- Which way should a patio face? North, west and the afternoon sun in SEQ
- A patio for a highset house, split-level or raised deck
- COLORBOND® steel explained: what is actually in your patio roof
- Patio steel that "looks the same"? 7 questions to ask your builder before you sign
- Patio and carport warranties explained: what the years actually cover
- Building a patio near the coast in South East Queensland: which steel, and how far from the surf?
- Why we only build with genuine COLORBOND® steel (and what we would tell you if we didn’t)
- Insulated patio panel thickness: how thick should your roof be?
- Can a patio go on an existing slab or pavers?
- Extending or replacing an old patio: what to check first
- Patios, carports and covered walkways for a granny flat
- What happens at a patio or carport on-site quote, and how to get the most from it
- How long does a patio take? From quote to handover in South East Queensland
- Form 15, Form 16 and Form 21: the patio and carport paperwork explained
- How to check a patio builder’s QBCC licence and insurance before you sign
- A patio on a townhouse or unit: getting the body corporate’s yes, then the approval
- Patios and carports on new estate lots in Logan Reserve, Park Ridge and Holmview
- Patios in Springfield, Spring Mountain and Augustine Heights: estate covenants and Ipswich rules
Free on-site quote
Tell us what you’d like built, the size and the address. We call you back within one business day, then the builder comes out and measures up.