Home
Service areas
Patios Beenleigh

Patios Beenleigh

Patios in Beenleigh and the estates around it, from quote to council to handover.

Book a free quote Call Fons 0432 183 475 Call Mony 0412 255 689

Beenleigh · Logan City Council

Your patio in Beenleigh, start to finish

Beenleigh mixes established lowset homes with new estates in Bahrs Scrub, Holmview and Eagleby. The older homes often have a low roofline that suits a flyover. The new ones usually have a slab and alfresco ready to extend.

We are close by, so site visits are quick. We measure, check the council mapping and give you one price that includes approval.

One team from quote to handover, no salespeople
Genuine Colorbond and BlueScope steel, all engineered
Plans, engineering and approval handled

Local knowledge

What's different about building in Beenleigh

Older lowsets
A flyover over a low fascia gives height and lets the heat out. It is the most common patio we build in Beenleigh.
New estates
In Bahrs Scrub and Holmview we design around small yards, side setbacks and the estate colour palette.
Flood-prone streets
Parts of Beenleigh near the Albert and Logan rivers sit on flood mapping. We check before designing the footings.

Step 1 · pick a style

Which patio suits your home?

Attached

Fixed to the fascia or a wall of your home. The most common and the best value.

See attached patios →

Flyover

Raised above your gutter for extra height, air flow and a modern look.

See flyover patios →

Freestanding

Stands on its own posts, anywhere on your block.

See freestanding patios →

Gable & hip

A pitched roof that matches your house. Attached, flyover or freestanding.

See gable & hip patios →

Louvred

Opening blades: sun when you want it, shelter when you need it.

See louvred patios →

Step 2 · pick a roof

Single skin or insulated?

Tap one to see what you get.

Single skin

The lowest-cost option
Spans up to about 5 m between beams
Can be built as close as 450 mm to a boundary (with approval)
Hotter and louder in rain than insulated
No downlights or fans in the roof

Best for: Carports, flyovers with good air flow, and budget builds.

From underneath you see the ribbed roof sheets and the steel purlins that hold them. Lights and fans fix to the beams.

Quote a single skin roof

Single skin roof from underneath — Single skin from underneath

Insulated panel

Keeps the heat out — noticeably cooler underneath
Quiet in rain
Finished white (or coloured) ceiling, no visible purlins
Downlights and ceiling fans built in
Longer spans, fewer beams

Best for: Patios and outdoor rooms you will sit under and use all year.

From underneath you see a flat, finished ceiling, usually Surfmist, with downlights and a fan set straight into it. Thicker panels span further and insulate better.

Quote a insulated panel roof

Insulated panel roof from underneath — Insulated panel from underneath

Local rules

Council rules for a patio in Beenleigh

Beenleigh is in the Logan City Council area, under the Logan Planning Scheme 2015 (version 9.2).

Site cover depends on the precinct: Logan sets the maximum roofed area by precinct, not just lot size: 60% in small lot areas, 50% in the standard suburban precinct, 40% large suburban, 35% small acreage and 20% (or 700 m²) on acreage. A patio counts, so on a tight lot we check this first.

Everything about building in Logan, and recent council changes

Our work

Recent patios

See the full gallery

How it works

From quote to handover

On-site quote & design
We come out, measure up and design it with you — colours, post and beam spacing, all within the engineering.
Plans & council approval
We draw, engineer and lodge everything: site plan, engineering, Form 15 and the building approval.
Materials ordered
Once approved, the materials are ordered from Australian suppliers. This takes about 2–4 weeks.
The build
Materials never sit at your place longer than 14 working days. Weather can delay us; we keep you posted.

Questions